DVB-T2 TV SYSTEM
MODEL: DS.D3663LUA.A8
1.General Description(概述)
DS.D3663LUA.A8 is a digital DVB-T2/DVB-T/DVB-C TV control board, which is suitable for Europe market.
DS.D3663LUA.A8是一款数字 DVB-T2/DVB-T/DVB-C 电视驱动板卡,适用于欧洲市场。
DS.D3663LUA.A8’s USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG.
该款方案的USB 接口可用于软件升级和多媒体播放。
HDMI1.3/1.4compliantwith ARC support,HDCP1.2 compliant. 该款方案的HDMI支持的版本为1.3/1.4兼容ARC 功能,HDCP支持的版本为1.2.

2.Configuration & General Precautions(使用注意事项)
 Protect the board from static electricityto avoid damage to the IC. 请使板卡远离静电以免损坏 IC。
 Keep the board away from conductor when it is working. 确保板卡工作时远离导体。
 Don’t press, distort or disassemble the board. 请勿强压、扭曲或拆解板卡。
 Clean the board with soft dry cloth when it’s dirty. 如果板卡脏了,请用干布擦拭。
 Don’t switch on the power supply before panel is correctly connected. 正确连接好屏线前请勿通电。
 Relative humidity:≤80% 相对湿度:≤80%.
 Storage temperature: -10~60°C 储存温度:-10~60°C
 Operation temperature: 0~40°C 工作温度:0~40°C
 The brightness of panel is influenced greatly by temperature, you should measure it after power on 10~30 minutes. 因屏的亮度易受温度影响,请在开机 10~30 分钟后再测量。
 Keep the board surface clean. Check the appearance of the board if there has any defective parts, such as dilapidate, weighty nick, etc.
  保持产品表面整洁。检查产品外观是否有明显品质不良存在,如:破损,严重划痕等。

3. Standard Configuration (标准配置)
Pictures are for reference only, specific to prevail in kind.
  图片仅供参考,请以实物为准。